Call now to find out how: 954-499-9450

SLE-90-BN

90° Sleeve Over Clamp..Finish:Brushed Nickel
Please log in for price


·         For 5/16" to 1/2" (8 to 12 mm) Thick Glass

·         No Glass Fabrication Required

·         Available in Several Styles and Finishes

·         Use Monolithic Tempered Glass

 

SGS Sleeve Over Glass Clamps are designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. No special fabrication of the glass is required. Can also be used to secure the glass panels in position while the applied silicone sealant in the joint cures (the silicone sealant glues the glass panels together, prevents water leakage, and provides the pull strength to keep the panels from separating). Clamps are secured in place by nylon tipped set screws.

Material: Solid brass

Glass Thickness Range: 5/16"(8mm) to 1/2"(12mm)

Hole Size Required: None No Glass Fabrication

Includes: Mounting screws and gaskets

For public safety, we recommend the use of only tempered safety glass.

Do not use power tools when installing these Clips

Maintenance Guidelines:

• Never use an abrasive cleaner on the hardware. Many of the components are coated with a clear lacquer that will be irreparably damaged if subjected to harsh, abrasive chemicals. Advise your customer that drying the hardware with a clean, soft towel daily is the best way to maintain the hardware.  If mineral deposits build-up, mix a couple of drops of a mild liquid soap (such as Ivory or a similar product) into a cup of warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse thoroughly with clean, warm water and dry.