Supreme Series Adjustable Wall Mount Full Back Plate..Finish: Chrome
in Several Beautiful Finishes
· Five Year
Monolithic Tempered Glass
The Supreme Series of professional Heavy Duty Hinges can
accommodate 3/8" (10 mm) to 1/2" (12 mm) glass. Made of solid brass with all moving parts
(pins and springs) in stainless steel. Using two hinges with 3/8" to
1/2" glass (10 to 12 mm) the hinge will hold up to 110 lbs. with a maximum door width of 36". Using
three hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will
hold up to 140 lbs. with a maximum door width of 36”. Construction: Solid Brass
Hinge Swings: 90 degrees in and 90 degrees Out Closing Type: Self-Centering
when within 15 degree of Closed Position, Custom finishes are available, please
contact us for details. Important Notes
SGS Shower Door Hinges are designed for residential or hotel shower use. If
hinges are to be used for other than their intended purpose, approval must be
obtained from the SGS Shower Door Technical Sales Department.
Supreme Series Heavy Duty Hinges
Glass Sizes: 3/8" (10mm) to 1/2" (12mm) thick tempered safety glass
Construction: Solid brass
Closing Type: Self-centering when within 15˚ of closed position
Includes: Gaskets, Philips head & Allen screws
Use of Gaskets:
For 3/8" (10mm) Glass: Use one thick gasket on each side
For 1/2" (12mm) Glass: Use one thin gasket on each side
For public safety, we recommend the use of only tempered safety glass.
Do not use power tools when installing these hinges.
• Never use an abrasive cleaner on the hardware. Many of the components are coated with a clear lacquer that will be irreparably damaged if subjected to harsh, abrasive chemicals. Advise your customer that drying the hardware with a clean, soft towel daily is the best way to maintain the hardware. If mineral deposits build-up, mix a couple of drops of a mild liquid soap (such as Ivory or a similar product) into a cup of warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse thoroughly with clean, warm water and dry.