Call now to find out how: 954-499-9450


NO Fabrication Glass Clamp..Finish: Brushed Nickel
Please log in for price
 (Out of Stock)

·         For 1/4" TO 1/2" (6 to 12 mm) Thick Glass

·         No Glass Fabrication Required

·         Available in Several Styles and Finishes

·         Use Monolithic Tempered Glass


SGS Solid Brass Shelf Clamps can be used to secure a shelf for lightweight articles. Clamps can also be used to secure fixed panels of glass. *When using these clamps is not recommended to hinge off the fixed panels secured with no fab clamps.  Clamps should be secured to wall with screws (included) in studs, or with Molly-type anchors. Nylon tip set screws secure the glass. Clamps will hold 1/4" to 1/2" (6 to 12 mm) glass, with no glass fabrication required.  Maximum 5" (127 mm) glass protrusion from wall is recommended.

Material: Solid brass

Glass Thickness Range: 1/4"(6mm) to 1/2"(12mm)

Hole Size Required: None No Glass Fabrication

Includes: Mounting screws and gaskets

For public safety, we recommend the use of only tempered safety glass.

Do not use power tools when installing these Clips

Maintenance Guidelines:

• Never use an abrasive cleaner on the hardware. Many of the components are coated with a clear lacquer that will be irreparably damaged if subjected to harsh, abrasive chemicals. Advise your customer that drying the hardware with a clean, soft towel daily is the best way to maintain the hardware.  If mineral deposits build-up, mix a couple of drops of a mild liquid soap (such as Ivory or a similar product) into a cup of warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse thoroughly with clean, warm water and dry.