3/8" Notchless Clamp-Sqaure Edges..Finish: Chrome
For 1/4" TO 1/2" (6 to 12 mm) Thick
No Glass Fabrication Required
Available in Several Styles and Finishes
Use Monolithic Tempered Glass
SGS Solid Brass Shelf Clamps can be used to secure a shelf
for lightweight articles. Clamps can also be used to secure fixed panels of
glass. *When using these clamps is not recommended to hinge off the fixed
panels secured with no fab clamps. Clamps
should be secured to wall with screws (included) in studs, or with Molly-type
anchors. Nylon tip set screws secure the glass. Clamps will hold 1/4" to 1/2"
(6 to 12 mm) glass, with no glass fabrication required. Maximum 5" (127 mm) glass protrusion from
wall is recommended.
Material: Solid brass
Glass Thickness Range: 1/4"(6mm) to 1/2"(12mm)
Hole Size Required: None No Glass Fabrication
Includes: Mounting screws and gaskets
safety, we recommend the use of only tempered safety glass.
Do not use
power tools when installing these Clips
• Never use an
abrasive cleaner on the hardware. Many of the components are coated with a
clear lacquer that will be irreparably damaged if subjected to harsh, abrasive
chemicals. Advise your customer that drying the hardware with a clean, soft
towel daily is the best way to maintain the hardware. If mineral deposits build-up, mix a couple of
drops of a mild liquid soap (such as Ivory or a similar product) into a cup of
warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse
thoroughly with clean, warm water and dry.