90Â° Glass to Glass Clamp..Material: Solid Brass..Finish: Chrome
For 5/16" to 1/2" (8 to 12 mm) Thick
Used to Secure 90° Fixed Panels of Glass for
Frameless Shower Enclosures
Glass Fabrication Required to Accommodate
Use Monolithic Tempered Glass
A truly versatile SGS Standard 90 Degree Glass Clamp that
has two uses: As a 90 Degree Clamp for vertical fixed panels in glass shower
enclosures; as a bracket for horizontal glass shelves within the enclosure.
Clamp design allows for flush mounting of shelf to wall, or for adjoining
panels to meet with a minimal gap.
Material: Solid brass
Glass Thickness Range: 3/8"(10mm) to 1/2"(12mm)
Hole Size Required: 5/8"(16mm) or 3/4"(19mm)
Includes: Mounting screws and gaskets
safety, we recommend the use of only tempered safety glass.
Do not use
power tools when installing these Clips
• Never use an
abrasive cleaner on the hardware. Many of the components are coated with a
clear lacquer that will be irreparably damaged if subjected to harsh, abrasive
chemicals. Advise your customer that drying the hardware with a clean, soft
towel daily is the best way to maintain the hardware. If mineral deposits build-up, mix a couple of
drops of a mild liquid soap (such as Ivory or a similar product) into a cup of
warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse
thoroughly with clean, warm water and dry.