Fixed Panel Glass Clamp ..Material: Solid Brass..Finish: Brushed Nickel
· A Nice Option to More Traditional U-Channel, in
that the Clamps Help the Appearance of an 'All-Glass' Look
· Fabrication: 5/8" or 3/4" (16 or 19
mm) Hole in Panel
· Glass Fabrication Required to Accommodate Clamps
· Solid Brass
· Used to Secure Fixed Panels of Glass for
Frameless Shower Enclosures
Use Monolithic Tempered
Glass Thickness Range
3/8” to ½” (10 to 12mm)
SGS Square Wall Mount Clamp (Hole-in-Glass Style) mount
directly to the wall, ceiling or floor to secure vertical fixed glass panels.
Clearance between the glass and wall is 3/16" (5 mm). Clear silicone can
be used to provide a clean, water-tight seal.
Includes Mounting Screws and Gaskets
Material: Solid brass
Glass Thickness Range: 3/8"(10mm) to 1/2"(12mm)
Hole Size Required: 5/8"(16mm) or 3/4"(19mm)
Includes: Mounting screws and gaskets
safety, we recommend the use of only tempered safety glass.
Do not use
power tools when installing these Clips
• Never use an
abrasive cleaner on the hardware. Many of the components are coated with a
clear lacquer that will be irreparably damaged if subjected to harsh, abrasive
chemicals. Advise your customer that drying the hardware with a clean, soft
towel daily is the best way to maintain the hardware. If mineral deposits build-up, mix a couple of
drops of a mild liquid soap (such as Ivory or a similar product) into a cup of
warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse
thoroughly with clean, warm water and dry.