135Â° Glass to Glass Clamp..Material: Solid Brass..Finish: Oil Rubbed Bronze
5/16" to 1/2" (8 to 12 mm) Thick Glass
to Secure 135° Fixed Panels of Glass for Frameless Shower Enclosures
Fabrication Required to Accommodate Clamps
These SGS Standard 135 Degree Glass Clamps are designed to
clamp 5/16" to 1/2" (8 to 12 mm) thick glass panels that meet at a
135 Degree angle.
Material: Solid brass
Glass Thickness Range: 3/8"(10mm) to 1/2"(12mm)
Hole Size Required: 5/8"(16mm) or 3/4"(19mm)
Includes: Mounting screws and gaskets
safety, we recommend the use of only tempered safety glass.
Do not use
power tools when installing these Clips
• Never use an
abrasive cleaner on the hardware. Many of the components are coated with a
clear lacquer that will be irreparably damaged if subjected to harsh, abrasive
chemicals. Advise your customer that drying the hardware with a clean, soft
towel daily is the best way to maintain the hardware. If mineral deposits build-up, mix a couple of
drops of a mild liquid soap (such as Ivory or a similar product) into a cup of
warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse
thoroughly with clean, warm water and dry.