Imperial Series: Wall Mount Hinge With Full Back Plate..Finish: Brushed Nickel
· Available in Several Beautiful
· Square Edges
· Five Year Warranty
· Use Monolithic Tempered Glass
Series of professional Hinges can accommodate 5/16" (8 mm) to 1/2"
(12 mm) glass. Made of solid brass with
all moving parts (pins and springs) in stainless steel. Using two hinges with
5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs.
(36 kg) with a maximum door width of 28" (711 mm). Using three hinges with
5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs.
(54 kg) with a maximum door width of 32" (813 mm). Construction: Solid
Brass Hinge Swings: 90 degrees in and 90 degrees Out Closing Type: Self-Centering
when within 15 degree of Closed Position, Custom finishes are available, please
contact us for details. Important Notes
SGS Shower Door Hinges are designed for residential or hotel shower use. If
hinges are to be used for other than their intended purpose, approval must be
obtained from the SGS Shower Door Technical Sales Department.
Imperial Series Hinges
3/8" (10mm) to 1/2" (12mm) thick tempered safety glass
Self-centering when within 15˚ of closed position
Gaskets, Philips head & Allen screws
Use of Gaskets:
For 3/8" (10mm) Glass: Use one thick gasket on each
For 1/2" (12mm) Glass: Use one thin gasket on each side
For public safety, we recommend the use of only tempered
Do not use power tools when installing these hinges.
• Never use an abrasive cleaner on the hardware. Many of the
components are coated with a clear lacquer that will be irreparably damaged if
subjected to harsh, abrasive chemicals. Advise your customer that drying the
hardware with a clean, soft towel daily is the best way to maintain the
hardware. If mineral deposits build-up,
mix a couple of drops of a mild liquid soap (such as Ivory or a similar
product) into a cup of warm water. Using a soft, non-abrasive cloth, clean the
hardware. Rinse thoroughly with clean, warm water and dry.