Imperial Series Glass to Glass Hinge..5Â° Preset Pin..Finish: Oil Rubbed Bronze
in Several Beautiful Finishes
· Five Year
Monolithic Tempered Glass
The Imperial Series of professional Hinges can accommodate
5/16" (8 mm) to 1/2" (12 mm) glass.
Made of solid brass with all moving parts (pins and springs) in
stainless steel. Using two hinges with 5/16" to 1/2" glass (8 to 12
mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of
28" (711 mm). Using three hinges with 5/16" to 1/2" glass (8 to
12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of
32" (813 mm). Construction: Solid Brass Hinge Swings: 90 degrees in and 90
degrees Out Closing Type: Self-Centering when within 15 degree of Closed
Position, Custom finishes are available, please contact us for details. Important Notes SGS Shower Door Hinges are
designed for residential or hotel shower use. If hinges are to be used for
other than their intended purpose, approval must be obtained from the SGS
Shower Door Technical Sales Department.
Glass Sizes: 3/8" (10mm) to 1/2" (12mm)
thick tempered safety glass
Construction: Solid brass
Closing Type: Self-centering when within 15˚ of
Includes: Gaskets, Philips head & Allen
Use of Gaskets:
(10mm) Glass: Use one thick gasket on each side
(12mm) Glass: Use one thin gasket on each side
safety, we recommend the use of only tempered safety glass.
Do not use
power tools when installing these hinges.
• Never use an
abrasive cleaner on the hardware. Many of the components are coated with a
clear lacquer that will be irreparably damaged if subjected to harsh, abrasive
chemicals. Advise your customer that drying the hardware with a clean, soft
towel daily is the best way to maintain the hardware. If mineral deposits build-up, mix a couple of
drops of a mild liquid soap (such as Ivory or a similar product) into a cup of
warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse
thoroughly with clean, warm water and dry.