|
PVC-04
95" Single-Piece Bottom SweepGlass Thickness: 3/8"
·
For 3/8”(10mm) Thick Glass
·
Single-Piece Bottom Sweep
·
Snaps Onto Door Bottom to Achieve a Seal
·
Use Monolithic Tempered Glass
·
95" (2.41 m) Stock Length
·
Suggested Gap: 7/16" (11 mm)
This SGS One-Piece Bottom Rail is snapped on the bottom of
the door to achieve a seal. Because it is a single-piece sweep, it means the
vinyl seal that hangs down from the sweep will firmly direct the water back
into the shower enclosure.
Material: Polycarbonate
Glass Thickness Range: 3/8”(10mm)
For public
safety, we recommend the use of only tempered safety glass.
Maintenance Guidelines:
• Never use an
abrasive cleaner on the hardware. Many of the components are coated with a
clear lacquer that will be irreparably damaged if subjected to harsh, abrasive
chemicals. Advise your customer that drying the hardware with a clean, soft
towel daily is the best way to maintain the hardware. If mineral deposits build-up, mix a couple of
drops of a mild liquid soap (such as Ivory or a similar product) into a cup of
warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse
thoroughly with clean, warm water and dry.
|
|
|
|